Filter
Top Products
Installing a Port Adapter
PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration
5-6
Figure 5-7 Placing the Port Adapter Retention Clip in the Locked
Position—Cisco uBR7246
For a Cisco uBR7223, place the port adapter lever in the locked position. (See
Figure 5-8.)
Figure 5-8 Placing the Port Adapter Lever in the Locked Position—Cisco uBR7223
Note If the port adapter lever does not move to the locked position, the port adapter is
not completely seated in the midplane. Carefully pull the port adapter halfway out of the
slot, reinsert it, and move the port adapter lever to the locked position.
This completes the procedure for installing a new port adapter or replacing a port adapter in a
Cisco uBR7200 series universal broadband router. Proceed to Chapter 7, “Installing PA-FE Port
Adapter Interface Cables,” to connect the necessary cables to your port adapter.
H11517
Port adapter
retention clip in
locked position
Port adapters
16177
Port adapter
lever in locked
position
Port adapters