Filter
Top Products
1-2
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
OL-10853-01
Chapter 1 Product Overview
Switch Connectors
Figure 1-2 Cisco SFS 7000D Server Switch
Switch Connectors
The Cisco SFS 7000P Server Switch uses the following connectors:
• Twenty-four 10-Gbps 4x copper InfiniBand ports for server and interswitch connectivity
• One 10/100 Ethernet RJ-45 management-Ethernet port for out-of-band management
• One RJ-45 console port used to configure and monitor the Cisco SFS 7000P Server Switch
The Cisco SFS 7000D Server Switch uses the following connectors:
• Twenty-four dual-speed 20-Gbps 4x copper InfiniBand ports that are capable of operating in either
20-Gbps DDR or 10-Gbps SDR mode for server and interswitch connectivity
• One 10/100 Ethernet RJ-45 management-Ethernet port for out-of-band management
• One RJ-45 console port used to configure and monitor the Cisco SFS 7000D Server Switch
Note There is a performance degradation if you mix 10-Gbps and 20-Gbps InfiniBand ports.
Switch Components
This section describes the following components of the Cisco SFS 7000P and SFS 7000D Server
Switches and contains these sections:
• LEDs, page 1-3
• Power Supply Bay, page 1-3
• Power Supply Module, page 1-3
180600
Power Supply
2