Filter
Top Products
3-14
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
OL-10853-01
Chapter 3 Installing the Switches
Managing the System
Figure 3-15 Removing a Pinch Connector
c.
To remove a cable with a pull connector, grasp the connector with one hand and push it toward the
port, then pull the latch away from the port with your other hand and gently move the connector back
and forth and away from the port. (See Figure 3-16.)
Figure 3-16 Removing a Pull Connector
Connecting Ethernet Management Devices
To connect the Ethernet management port to external devices such as switches, routers, and hubs, use an
Ethernet cable. For the location of the Ethernet management port, see Figure 3-11 and Figure 3-12.
Managing the System
You can manage the InfiniBand system using the following methods:
13
144962
Press here
Press here
10
144963
Hold here
Hold here
Pull here