Filter
Top Products
CHAPTER
6-1
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
OL-10853-01
6
Hardware Diagnostic Tests
This chapter describes how to run diagnostic tests on the hardware for the
Cisco SFS 7000P and SFS 7000D Server Switches, and it contains the following sections:
• About Diagnostic Tests, page 6-1
• Displaying Hardware Errors, page 6-8
About Diagnostic Tests
Hardware diagnostic tests can be performed through the CLI or the Element Manager GUI. For
instructions about how to run a test with the Element Manager GUI, see the Cisco SFS 7000 Series
Product Family Element Manager User Guide. A POST is run automatically on various components at
power-on.
The following sections refer to running and displaying tests with the CLI. For complete diagnostic
command information, see the Cisco SFS 7000 Series Product Family Command Reference.
LED Tests
LED tests allow you to set a particular LED to blink in a specific way so that you can more easily identify
a specific component in a rack. See Chapter 5, “Managing the Switch” for more information on LEDs.
Self-Tests
The Cisco SFS 7000P and SFS 7000D Server Switches provide the following diagnostic tests:
• Card Self-Test
• Chassis Self-Test
• Fan Self-Test
• Power Supply Self-Tests