Filter
Top Products
2-5
Administration Guide for Cisco Unified MeetingPlace SMTP E-Mail Gateway Release 5.4
OL-11018-01
Chapter 2 Installing Cisco Unified MeetingPlace SMTP E-Mail Gateway
Verifying the Cisco Unified MeetingPlace SMTP E-Mail Gateway Installation
Step 15 Click Finish.
Note If the InstallShield Wizard was unable to copy certain files during the installation because these
files were in use, you will be prompted to reboot your system. When the system reboots, all of
the copied files will be installed correctly.
Verifying the Cisco Unified MeetingPlace SMTP E-Mail
Gateway Installation
After you complete the Cisco Unified MeetingPlace SMTP E-Mail Gateway installation, do the
following tests to verify that all the components are functioning correctly:
• Schedule a Cisco Unified MeetingPlace meeting and invite one or two users. Verify that the invited
users receive an e-mail meeting notification.
If your users do not receive a notification, see the “Resolving Connectivity Problems” section on
page 5-1, and the “Resolving Meeting Notification Problems” section on page 5-2.
• Cancel and reschedule a Cisco Unified MeetingPlace meeting. Verify that invited users receive
e-mail notifications about the meeting change.
If your users do not receive a notification, see the “Resolving Meeting Notification Problems”
section on page 5-2.
• When Cisco Unified MeetingPlace Web Conferencing is installed, use that application to schedule
a meeting and verify that the click-to-attend link works.
Stopping and Restarting the Cisco Unified MeetingPlace SMTP
E-Mail Gateway
Caution Never restart the Cisco Unified MeetingPlace SMTP E-Mail Gateway service without first stopping the
Cisco Unified MeetingPlace Notification Gateway service.
Do the following procedure to stop and restart the Cisco Unified MeetingPlace SMTP E-Mail Gateway.
To Stop and Restart the Cisco Unified MeetingPlace SMTP E-Mail Gateway
Step 1 Stop the MeetingPlace Notification Gateway service.
a. On the server where Cisco Unified MeetingPlace SMTP E-Mail Gateway is installed, click Start >
Settings > Control Panel > Services.
b. Right-click MeetingPlace Notification Gateway and choose Stop.
The MeetingPlace Notification Gateway and MeetingPlace SMTP Gateway services stop.