Filter
Top Products
CHAPTER
3-1
Administration Guide for Cisco Unified MeetingPlace SMTP E-Mail Gateway Release 5.4
OL-11018-01
3
Configuring the Cisco Unified MeetingPlace
SMTP E-Mail Gateway for Operation
This chapter describes how to configure your Cisco Unified MeetingPlace SMTP E-Mail Gateway for
operation.
See the following sections:
• Accessing and Configuring the Cisco Unified MeetingPlace Gateway Configurations Tool, page 3-1
• Setting E-Mail Notification Parameters, page 3-3
• Changing the Cisco Unified MeetingPlace Gateway SIM Configuration, page 3-5
Accessing and Configuring the Cisco Unified MeetingPlace
Gateway Configurations Tool
After you install Cisco Unified MeetingPlace SMTP E-Mail Gateway, you must use the Cisco Unified
MeetingPlace Gateway Configurations tool to ensure that the SMTP E-Mail Gateway is properly
configured for operation. The Cisco Unified MeetingPlace Gateway Configurations tool is the user
interface for the Gateway SIM.
To start the Cisco Unified MeetingPlace Gateway Configuration tool, do one of the following on the
desktop of the computer on which the Gateway SIM is installed:
• Click Start > Program > MeetingPlace Applications > MeetingPlace Gateway Configuration.
• Click the Cisco Unified MeetingPlace icon (an open orange door) in the system tray.
The Cisco Unified MeetingPlace Gateway Configuration tool appears.
To configure the Cisco Unified MeetingPlace Gateway Configuration tool, do the following procedure.
To Configure the Cisco Unified MeetingPlace SMTP E-Mail Gateway to Use an E-Mail Server
Step 1 Start the Cisco Unified MeetingPlace Gateway Configuration tool.
Step 2 Click the E-Mail Gateway tab in the Cisco Unified MeetingPlace Gateway Configurations tool. The
E-Mail Gateway page appears.
Table 3-1 provides information about the elements on the page.
Step 3 Indicate whether the e-mail server requires authentication to allow the Cisco Unified MeetingPlace
SMTP E-Mail Gateway to send notifications as follows: