Filter
Top Products
Index
WC-303
Cisco IOS Wide-Area Networking Configuration Guide
DCE switch WC-140
DE bit WC-146
DE list, defining WC-146
device, configuring WC-140
dial backup WC-138
dial peer destination-patterns, configuring WC-175
dial peer ports (POTS only), enabling WC-175
dial peer preferences, configuring WC-175
dial peer session targets, configuring WC-176
digit-forwarding, configuring WC-175
discard eligibility (DE) bit WC-146
DLCI
configuring
WC-173, WC-246
multicast mechanism WC-11
static address mapping WC-116, WC-136, WC-137
status mechanism WC-11
DLCI priority levels WC-147
prerequisites WC-146
DLCIs and the LMI, displaying WC-147
DLCI to an ATM PVC, mapping WC-173
DTE devices WC-140
DTE switch WC-11
encapsulation
enabling
WC-180
encapsulation types WC-115
IETF (example) WC-148
end-to-end keepalive WC-128
Enhanced Local Management Interface WC-126
(examples) WC-156
overview WC-126
ESF format, enabling WC-178
FECN
bit promotion
WC-11
FRF.5
See Frame Relay-ATM Interworking
FRF.5 Network Interworking, concepts
WC-172
FRF.8
See Frame Relay-ATM Interworking
hardware
WC-114
idle timeout interval, setting WC-122
IETF encapsulation
(examples)
WC-148
Inverse ARP WC-11, WC-116
subinterfaces WC-136
IP tunnel WC-11
IP unnumbered
(example)
WC-151
IPX
(examples)
WC-151
keepalives WC-119
end-to-end WC-128
keepalive timer, enabling WC-180
LAPF WC-123
LMI
autosense
WC-117
enabling WC-180
DCE polling verification timer WC-119
DTE error threshold WC-119
DTE full status polling interval WC-119
DTE monitored events counter WC-119
explicit configurations WC-118
keepalives WC-119
NNI error threshold WC-119
NNI monitored events counter WC-119
NNI polling verification timer WC-119
polling intervals WC-119
specifications WC-10
MIB extensions
WC-114
multicast mechanism WC-11
multipoint subinterfaces
DLCI associations
WC-136
DLCIs WC-136
dynamic address resolution WC-136
dynamic address resolution (example) WC-151
network clock base rate, configuring WC-179
NNI
interfaces
WC-140