Filter
Top Products
Index
WC-310
Cisco IOS Wide-Area Networking Configuration Guide
multiple parallel DLCIs, enabling WC-147
multipoint subinterface with a DLCI, associating WC-136
multiprotocol SMDS
configuration (example)
WC-199
multiprotocol X.25 WC-225
N
netbooting
See booting from a network server
network-clock base-rate command
WC-179
network-clock-select command WC-80
network service access point
See NSAPs
network timing services
configuring
WC-80
example WC-109
Network-to-Network Interface
See NNI
no form of a command
using
xxix
no frame-relay ip tcp header-compression
command
WC-145
no-incoming and no-outgoing access WC-253
no keepalive command WC-173
no shutdown command WC-18
notes
usage in text
xxiii
NPM
interface types
WC-4
NSAPs
addresses
configuration (example)
WC-92
configuring WC-29, WC-30
ESI and selector fields, configuring WC-30
N x 64 CES services WC-77
O
OAM
ATM
configuration (example)
WC-90
loopback cells
ATM, configuring
WC-23, WC-35
management
configuration (example)
WC-94
configuring WC-40, WC-41, WC-42, WC-43
overview WC-5
oam-pvc command WC-24, WC-26, WC-178
oam-pvc manage command WC-42
oam retry command WC-24, WC-35, WC-42, WC-43
oam-svc command WC-35, WC-43
on-hook detection WC-79
online documentation
See CCO
Operations, Administration, and Maintenance
See OAM
OSPF
broadcasts on X.25
WC-228
output packet size, setting WC-218
output window size, setting WC-218
P
Packet-Level Protocol (PLP) restarts WC-222
packet-level restarts, disabling WC-222
packets
compressed TCP/IP header
WC-229
X.25 sequence numbering WC-214
packet-switched nodes
DDN X.25
WC-15, WC-257
PAD
access on X.25
WC-228
passive-reply mode
Frame Relay end-to-end keepalive
WC-129
payload compression on a multipoint interface,
enabling
WC-142