Filter
Top Products
Index
WC-304
Cisco IOS Wide-Area Networking Configuration Guide
See also Frame Relay, LMI
OAM PVC management, enabling
WC-178
packet discard eligibility WC-146
payload compression WC-142
peers, defining WC-175
point-to-point links (example) WC-152
point-to-point tunnel (example) WC-165
PPP
DCE configuration
(example)
WC-159
DTE configuration
(example)
WC-158
frame format WC-131
PVC mapping, defining WC-132
restrictions WC-130
sessions WC-130
priority queue-list, specifying WC-122, WC-127
protocol addresses
mapping DLCIs
WC-116
PVCs
configuring
WC-174, WC-178
enabling WC-180
PVC switching
enabling
WC-179
(examples) WC-163
route, configuring WC-173
routing protocols WC-10, WC-116
software capabilities WC-10
standards WC-10
static address mapping
(examples)
WC-149
static mapping
routing protocols
WC-137
static routes
PVC switching
WC-140
status mechanism WC-11
subinterfaces WC-12
addressing WC-134
configuration tasks WC-132
(examples) WC-150 to WC-152
overview WC-133
partially meshed networks WC-133
point-to-point addressing WC-135
split horizon WC-133
static address mapping WC-137
transparent bridging WC-137
SVCs
configuration (examples)
WC-153
configuration task list WC-120
group addresses WC-122
interfaces WC-121
map class WC-121
overview WC-119
platforms WC-120
static address mapping WC-123
subinterfaces WC-121
SVCs and PVCs WC-11
SVC support, enabling WC-121
switching WC-11
enabling WC-139
examples WC-159 to WC-166
hybrid PVC (figure) WC-163
over IP tunnel (figure) WC-165
switch type, enabling WC-180
TCP/IP header compression WC-143 to WC-145
disabling WC-145
(examples) WC-167 to WC-169
throughput WC-141
traffic rate for map class, defining WC-127
traffic shaping WC-11
access lists WC-127
customizing WC-128
DLCIs WC-127
(example) WC-154
PVCs and SVCs WC-124
queuing WC-127
traffic shaping and per-virtual circuit queuing,
enabling
WC-125