Filter
Top Products
Index
WC-311
Cisco IOS Wide-Area Networking Configuration Guide
payload compression on a point-to-point interface,
enabling
WC-142
PDN
CMNS (example)
WC-279
datagram transport (figure) WC-222
X.25 WC-14
X.25, configuring WC-214
permanent virtual circuit
See PVC
physical layer interface module
See PLIM
ping
X.25 over multiple serial lines (example)
WC-287
PLIM
description, on the AIP
WC-7
SONET
ATM
WC-48
point-to-multipoint signalling
ATM
configuring
WC-32
point-to-point or multipoint subinterface,
creating
WC-133
Point-to-Point Protocol
See PPP
point-to-point subinterface with a DLCI,
associating
WC-135
poll timer
configuring
WC-37
POP
with access restricted to one CUG (example)
WC-285
with multiple CUGs and no public access
(example)
WC-285
with multiple CUGs and public access
(example)
WC-286
with no CUG access (example) WC-285
X.25 CUGs WC-251
X.25 CUGs network subscription WC-249
port command WC-175
PPP
Frame Relay
DCE configuration
(example)
WC-159
DTE configuration
(example)
WC-158
frame format WC-131
PVC mapping, defining WC-132
restrictions WC-130
ppp authentication chap command WC-69
PPP over ATM
Cisco proprietary
configuring
WC-72
(example) WC-108
configuring WC-68 to WC-73
description WC-68
IETF-compliant LLC encapsulated
configuring
WC-71
(example) WC-106
IETF-compliant MUX encapsulated
configuring
WC-70
(example) WC-102
virtual templates WC-69
PPP over Frame Relay WC-130
predictor compression WC-207
preference command WC-175
preferential CUGs WC-251, WC-252
prefix command WC-175
priority queueing
X.25
WC-248
privileged EXEC mode
summary
xxvi
profiles
X.25
WC-246
prompts
system
xxvi
protocol addresses
ATM
configuring
WC-20
protocol command WC-20, WC-31, WC-33, WC-34
pseudobroadcasting WC-3