Filter
Top Products
Index
WC-314
Cisco IOS Wide-Area Networking Configuration Guide
show smds traffic command WC-199
show sscop command WC-85
show x25 interface command WC-266
show x25 map command WC-266
show x25 remote-red command WC-266
show x25 route command WC-245, WC-266
show x25 services command WC-266
show x25 vc command WC-238, WC-266
show x25 xot command WC-266
shutdown command WC-18, WC-70
signalling
ATM
point-to-multipoint, configuring
WC-32
SIG-TS-001/1991 standard WC-197
SMDS
address
mapping
WC-191
resolution (ARP) WC-193
specification WC-191
AIP
E.164 addresses
WC-52
AppleTalk
address mapping
WC-192
configuring WC-196
extended network (example) WC-201
fast switching WC-198
nonextended network (example) WC-201
ARP
address mapping
WC-192
configuring WC-195
ATM
configuring
WC-51
bridging WC-196
address mapping WC-192
broadcast ARP messages WC-193
Cisco’s implementation WC-189
configuration (examples) WC-199
configure protocols WC-194
customizing WC-194
DECnet
address mapping
WC-193
configuring WC-195
DXI 3.2 with heartbeat WC-14, WC-197
dynamic routing table WC-13, WC-194
enabling, task overview WC-191
encapsulation WC-191
fast switching
configuring
WC-198
transparent bridging WC-196
hardware requirements WC-189
IP
address mapping
WC-193
configuring WC-195
fast switching WC-198
pseudobroadcasting WC-198
IP split horizon WC-13
IPX
address mapping
WC-193
configuring WC-195
dynamic address mapping WC-194
dynamic address mapping (example) WC-200
fast switching WC-198
ISO CLNS
address mapping
WC-193
configuring WC-195
monitoring activity WC-199
monitoring connection WC-198
multicast address map WC-192
multiple logical IP subnetwork
(example)
WC-201
LIS WC-14, WC-196
multiprotocol configuration (example) WC-199
network connection WC-13
protocols supported WC-13
pseudobroadcasting WC-14, WC-198
(example) WC-203
remote peer configuration (example) WC-200
required protocol multicasts (table) WC-195