Filter
Top Products
Index
WC-301
Cisco IOS Wide-Area Networking Configuration Guide
destination address and Frame Relay map class for QoS,
specifying
WC-123
destination-pattern command WC-175
dial backup
Frame Relay DLCIs
WC-138
dial-peer voice command WC-175
discard eligibility
Frame Relay packets
WC-146
DLCI
defining
WC-137
destination address, mapping WC-116, WC-137
destination bridge, defining WC-116
for ISO CLNS frames, defining WC-116
for the subinterface, specifying WC-139
map bridge, defining WC-137, WC-138
multicast mechanism WC-11
on the subinterface, associating WC-138
static address mapping WC-116, WC-137
status mechanism WC-11
X.25 profiles WC-246
DNS-based routing, X.25 WC-242
(example) WC-278
documentation conventions
Cisco IOS
xxii
DTE
DDN X.25 encapsulation
WC-259
Frame Relay WC-11
devices WC-140
rules for initiating calls on X.25 WC-213
use in LAPB WC-206
virtual circuit range on X.25 WC-214
X.25 encapsulation WC-212, WC-234
DXI 3.2 WC-14, WC-197
dxi map command WC-84
dxi pvc command WC-83
dynamic addressing
SMDS
WC-194
dynamic rate queues
(example)
WC-95
E
E.164
telephone numbering specification
WC-73
E.164 addresses, SMDS
configuring
WC-52
E.164 auto conversion
ATM
WC-73
E164_AESA
address format
WC-74
E164_ZDSP
address format
WC-74
ELMI, enabling WC-126
encapsulation aal5 command WC-20, WC-31, WC-174,
WC-178
encapsulation atm-dxi command WC-83
encapsulation frame-relay command WC-115, WC-121,
WC-133, WC-138, WC-139, WC-173, WC-180, WC-246
encapsulation idle time, enabling WC-231
encapsulation lapb command WC-207, WC-208
encapsulation lapb dce command WC-207
encapsulation lapb dce multi command WC-207
encapsulation lapb multi command WC-207, WC-208,
WC-211
encapsulation ppp command WC-69
encapsulations
AIP
AAL3/4, enabling
WC-51
AAL3/4, static mapping WC-51
AAL5-LLC SNAP WC-53
AAL5-MUX WC-53
AAL5-NLPID WC-53
ATM
configuring
WC-20
BFE WC-260
configuring WC-133
DDN X.25 WC-259
default serial WC-212
LAPB WC-207
multiprotocol WC-208