Filter
Top Products
Index
WC-307
Cisco IOS Wide-Area Networking Configuration Guide
IMA
bandwidths
WC-67
configuring WC-54 to WC-68
(example), E1 WC-97
(example), T1 WC-100
overview WC-54 to WC-56
troubleshooting WC-66
ima active-links-minimum command WC-62
ima clock-mode command WC-62
ima differential-delay-maximum command WC-62
ima-group command WC-58
ima test command WC-62
inarp command WC-23
incoming and outgoing access, CUGs WC-253
input interface-based insertion, enabling WC-241
input packet size, setting WC-218
input window size, setting WC-218
interface atm command WC-18, WC-26, WC-178
interface cbr command WC-77, WC-78, WC-80
interface command WC-143
LAPB WC-207
interface configuration mode
summary
xxvi
interface fr-atm command WC-173
interface IP address, specifying WC-121
interface point-to-point command WC-138
interfaces
specifying
WC-138
X.25 address alias WC-221
interface serial command WC-82
backup interfaces WC-139
Frame Relay subinterfaces WC-133
LAPB WC-211
subinterfaces WC-121, WC-138
SVCs WC-121
X.25 subinterfaces WC-224
interface serial multipoint command WC-197
interface virtual-template command WC-69
Interim Local Management Interface
See ILMI
International Telecommunication Union Standardization
Sector (ITU-T) X.25 recommendation
WC-14
Internet Engineering Task Force
See IETF
internet protocol
See IP
Inverse Address Resolution Protocol
See Inverse ARP
See also Frame Relay, Inverse ARP
Inverse ARP
ATM
configuration (example)
WC-89
configuring WC-45
PVCs, configuring WC-23
Frame Relay WC-11, WC-141
dynamic address mapping WC-116
subinterfaces WC-136
Inverse Multiplexing over ATM
See IMA
IP
ATM
configuration (example)
WC-94, WC-95
configuring WC-43, WC-44, WC-45
Frame Relay switching
over IP tunnel
WC-11
header compression
Frame Relay
WC-143
multicast address, SMDS address mapping WC-193
multicasting
configuring
WC-33
overview, WAN WC-9
SMDS
configuring
WC-195
subnetworks WC-196, WC-197
split horizon
X.25 default
WC-224
unnumbered
Frame Relay (example)
WC-151