Filter
Top Products
Index
WC-308
Cisco IOS Wide-Area Networking Configuration Guide
IP address and subnet mask, assigning WC-174
ip address command WC-18, WC-121, WC-174, WC-211
SMDS WC-197
IP map for encapsulation and TCP/IP header compression,
configuring
WC-144
ip route-cache command WC-70, WC-198
ip unnumbered ethernet command WC-69
IPX
Frame Relay
(examples)
WC-150, WC-151
multicast address, SMDS address mapping WC-193
SMDS
configuring
WC-195
dynamic address mapping (example) WC-200
ipx network command WC-82
ipx route-cache command WC-198
ISDN
X.25 over D channel
WC-15
ISO CLNS
configuring
SMDS
WC-195
multicast address, SMDS address mapping WC-193
transmitting congestion information over Frame
Relay
WC-11
ITU-T X.25 Recommendation WC-14
K
keepalive command WC-119, WC-180
keepalives
Frame Relay
WC-119
Frame Relay end-to-end WC-128
keepalive timers
configuring
WC-37
L
LAPB
compression
WC-207
configuration
(example)
WC-267
task list WC-206
custom queuing WC-210
datagram transport WC-14, WC-207
encapsulation WC-207
frame error detection WC-206, WC-208
general statistics, displaying WC-266
modulo, function WC-209
multiprotocol (example) WC-268
N1 parameter WC-209
over leased serial line WC-206, WC-210
parameters (table) WC-209
PLP restarts WC-222
priority queuing WC-210
retransmission criteria WC-206, WC-208
timers, link failure (T4) and hardware outage WC-210
transparent bridging (example) WC-268
window parameter, k WC-209
lapb interface-outage command WC-209
lapb k command WC-209
lapb modulo command WC-209
lapb n1 command WC-209
lapb n2 command WC-209
lapb t1 command WC-209
lapb t4 command WC-209
LAPF, displaying WC-147
LAPF link idle timer value T203, setting WC-123
LAPF maximum retransmission count N200,
setting
WC-123
LAPF retransmission timer value T200, setting WC-123
LAPF window size k, setting WC-123
leased serial line
LAPB on
WC-206
linecode b8zs command WC-178
linecode hdb3 command WC-178
Link Access Procedure, Balanced
See LAPB
LIS
AIP
WC-45