Filter
Top Products
Index
WC-297
Cisco IOS Wide-Area Networking Configuration Guide
atm maxvc command WC-50
atm mid-per-vc command WC-53
atm multicast command WC-52
atm multipoint-interval command WC-33
atm multipoint-signalling command WC-33
atm nsap-address command WC-30, WC-31, WC-32
atm oam flush command WC-84
ATM on the AIP for Cisco 7500 series
(examples)
WC-85
ATM port adapter
(example)
WC-110
interface types WC-3
atm pvp command WC-81
atm rate-queue command WC-48
atm rate-queue tolerance svc command WC-47
atm rawq-size command WC-50
atm rxbuff command WC-50
atmsig close atm command WC-38
atm sig-traffic-shaping strict command WC-33, WC-35
atm smds-address command WC-52
atm sonet stm-1 command WC-48
ATM switch interface shelf
See AXIS
atm txbuff command
WC-51
atm uni-version command WC-31
ATM UNI version override
configuring
WC-23
atm vc-per-vp command WC-51
atm vp-filter command WC-52, WC-53
available bit rate
See ABR
AXIS
PPP over ATM
WC-72
B
backup delay command WC-139
backup enable and disable delay, specifying WC-139
backup interface for the subinterface,
configuring
WC-139
backup interfaces
Frame Relay
WC-138
Bc, Frame Relay committed burst size WC-122
BECN WC-156
BECN feedback for frame-transmission rate,
enabling
WC-122
BFE
address
conventions (figure)
WC-258
translation table WC-260
Blacker Emergency Mode WC-261
Cisco’s implementation WC-14
configuration WC-257
(example) WC-286
description WC-15
encapsulation WC-260
encryption WC-259
general statistics, displaying WC-266
IP address conventions (figure) WC-258
mapping algorithm WC-259
bfe command WC-261
BFE Emergency Mode (example) WC-286
bidirectional mode
Frame Relay end-to-end keepalive
WC-129
Blacker Emergency Mode
address translation
WC-260
configuration WC-257
description WC-15
entering WC-261
leaving WC-261
Blacker Front End
See BFE
booting
from a network server
over Frame Relay (example)
WC-157
over X.25 (example) WC-288
from a network server, X.25 (example) WC-288