Filter
Top Products
Chapter 6 Configuring Your Printer Using The Menus
−
44
−
6.8 Menu Mode Description
Group Menu Menu Item Default Range Description
CLP-9301:
06 IPS
CLP-9301:
02 − 08 IPS
Printing Speed
CLP-9001:
06 IPS
CLP-9001:
02 − 12 IPS
Set print speed.
Print Darkness 10 00 − 30* Adjust print darkness.
*
This changes to 00 − 20 for DPP
or DM4 language selected.
Print Method TT DT / Direct Thermal
TT / Thermal Transfer
Set printing method.
Ribbon Torque 4 1 − 5 Set ribbon torque.
Label Width 4.09in
104.0mm
0.74 − 4.16in
18.8 − 105.7mm
Set print label width.
Continu. MediaLen 4.00in
101.6mm
0.25 − 40.00in
6.4 − 1016.0mm
Set media length of one label when
using continuous paper.
Vertical Position 0.00in
0.00mm
- 1.00 − 1.00in
-25.4 − 25.4mm
Adjust print start position.
Horizont Shift 0.10in
2.5mm
- 1.00 − 1.00in
- 25.4 − 25.4mm
Adjust left-to-right position in dots.
CLP-9301:
05 IPS
CLP-9301:
02-05 IPS
* Page Setup
Maximum Backfeed
CLP-9001:
07 IPS
CLP-9001:
02-07 IPS
Set maximum backfeed speed.
Media Sensor See Thru See Thru
Notch
Reflect
None
Select label sensor.
See Thru: Transparent GAP sensor.
Notch: Transparent HOLE sensor.
Reflect: Reflective sensor.
None: No use of sensor (continuous
paper).
Sensor Monitor
x.xV adc Monitor media sensor sensing level.
When None, See Thru (GAP) sensor
sensing level is monitored.
Sensor Level 1.5V/1.7V 0.0V − 3.3V Set sensor threshold.
Top Form Yes Yes
No
Select Top-Of-Form (TOF) sensing.
Printer will feed to top-of-form before
first print after power on.
* System Setup
Buzzer Select Exec/Err Exec/Err
All
Error
Key
None
Select condition for buzzer.
Exec/Err: Sounds when setting and
execution are completed or error
occurs.
All: Sounds in all situations.
Error: Sounds only in error.
Key: Sounds in key operation.
None: No sound.
(continued)