Filter
Top Products
iDP-3210 User’s Manual
47/67 CITIZEN
(5) Specifying Collectively the Print Mode (ESC ! n)
Code: [1Bh] + [21h] + n
* {0 is less than or equal to n is less than or equal to FF} The data is described in Hex code.
Printing mode is assigned. Each n bit indicates the following:
VALUEBIT FUNCTION
0 1
1 Undefined
2 Undefined
3 Undefined
4 Highlighting Canceled Specified
5 Double height Canceled Specified
6 Double width Canceled Specified
7 Undefined
8 Underline Canceled Specified
• With double height and double width being specified simultaneously, double wide and
double high characters are consisted.
• An underline is attached to the full character width, which, however, is not attached to the
part having been skipped by the horizontal tab. Neither is it attached to 90°-right-turned
characters.
• The underline width is as having been specified by ESC -. The initial value is "1".
(6) Specifying/Canceling Download Character Set (ESC % n)
Code: [1B]h + [25]h + n
* {0 is less than or equal to n is less than or equal to 20} Data is described in Hex code.
Specifying/canceling download characters. Download characters and download bit
images cannot be defined simultaneously. Further, only the lowest bit (n0) is valid
for n. The lowest bit (n0) indicates the following:
n0= 0: Canceling download character
n0= 1: Specifying download character
idp-3210 User's Manual