Filter
Top Products
iDP-3210 User’s Manual
51/67 CITIZEN
(14) Specifying/canceling highlighting (ESC E n)
Code : [1B]h + [45]h + n
* {0 is less than or equal to n is less than or equal to FF} Data is described in Hex code.
Specifying/canceling the highlighted characters.
"n" is valid only for the lowest bit (n0).
* Control by the lowest bit (n0) is shown as follows:
n0 Type
0 Canceling highlighting.
1 Specifying highlighting.
• This is effective to all characters.
• Dot configuration of a highlighted character includes one extra dot added at its side.
(15) Specifying/canceling Double Printing (ESC G n)
Code : [1B]h + [47]h + n
* {0 is less than or equal to n is less than or equal to FF} Data is described in Hex code.
Specifying/canceling the double printing.
• "n" is valid only for the lowest bit (n0).
• Control by n is shown as follows.
n0 Type
0 Canceling double printing.
1 Specifying double printing.
• The print result of Double printing and highlight character printing is completely same
(16) Printing and feeding paper n/203 inch (ESC J n)
Code : [1B]h + [4A]h + n
{0 is less than or equal to n is less than or equal to FF} Data is described in Hex code.
Prints data inside the print buffer and feeds paper by n/156 inch.
• Specified volume does not remain.
• The beginning of the line is to be considered as the next printing start position.
idp-3210 User's Manual