![](http://pdfasset.owneriq.net/7/7a/77a348ca-9b8d-4fee-870a-3c8ca980457e/77a348ca-9b8d-4fee-870a-3c8ca980457e-bg9e.png)
CT-S300
• Setting memory switch 4 (a = 4)
n b (Set Value) Function
At the selection of Black mark paper, disables auto
end-measurement.
48 (Default)
1
At the selection of Black mark paper, enables auto
end-measurement.
49
At the selection of Black mark paper, sets sensor position
to be on the printing side
48(Default)
2
At the selection of Black mark paper, sets sensor position
to be on the back of the printing side
49
3 48 (Default) Undefined
4 48 (Default) Undefined
5 48 (Default) Undefined
6 48 (Default) Undefined
7 48 (Default) Undefined
48 (Default) Forcible partial cut disabled.
8
Forcible partial cut enabled (full cut by command:
enabled).
49
* Memory switches 4-1, -2 are valid when memory switch 3-4 is ON.
- 158 -