Filter
Top Products
- 168 -
fn=4： Function 4 Sending the Set Memory Switch Value
GS ( E pL pH fn a
[Code] <1D>H<28>H<45>H <pL><pH><fn><a>
[Range] （pL＋pH×256）＝2
fn＝4
CT-S280/BD2-2220
a ＝ 1,2,3
CT-S300/PMU2XXX
a ＝ 1,2,3,4
CT-S2000/CT-S4000/CT-S310
a ＝ 1,2,3,4,5
[Outline] [The specification which is common to the model]
• Sends the content of memory switch set in “a”.
Hex. No. of Data
Header 37H 1
ID 21H 1
Data 30H or 31H 8
NULL 00H 1
• Sends the set value of data in 8-byte data raw in order of bits 8, 7, 6, ....
OFF: 30H (“0”)
ON : 31H (“1”)
[Caution] [The specification which depend on the model]
CT-S2000/CT-S4000/CT-S310
• MSW7 to MSW10 cannot be sent by this command.
• Transmission is available by <Sending preset customize value>.