Filter
Top Products
iDP3550/3551 User’s Manual
98
CITIZEN
ESC "*" m n1 n2 [d] n1 + 256 × n2
[Function] Specifying the bit image mode
[Code] <1B>H <2A>H m n1 n2 [d] n1 + 256×2
[Range] m = 0, 1
0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 3
0 ≤ d ≤ 255
[Outline] This command specifies the bit image for the mode m as to the number of dots specified
with n1 and n2. Divide the number of dots printed by 256 and assume its quotient to be n2
and remainder to be n1. Therefore, the number of horizontal dots will be n1 + 256 × n2.
If the bit image data is entered beyond the dot positions printable in one line, the surplus
data will be discarded. The following table shows the bit image modes for m.
Horizontal Direction
Total Dots
m
Vertical
Dots
Dot Density
Adjacent Dot
Setting
DP-650 DP-652 DP-654 DP-657
0 8 Single density Allowed 115 140 180 200
1 8 Double density Disallowed 230 280 360 400
[Caution] If the value of m is beyond the conditions, the data subsequent to n1 will be processed as
normal data. Normal data processing will be restored after completing bit image print.