Filter
Top Products
iDP3550/3551 User’s Manual
45
CITIZEN
SO (CBM2 Mode)
[Function] Specifying the double width character/shift-out side characters
[Code] <0E>H
[Outline] The data following this command is printed doubled in the horizontal direction. Double
width characters remain valid until the double width character cancel command is entered,
but they are also cancelled after they are printed one line. Note that the double width
characters take up two ordinary characters worth of width.
In the case of a serial interface, if 7-bit data is selected, the shift-out side character is printed.
SI (CBM1 Mode)
[Function] Canceling the double width character
[Code] <0F>H
[Outline] This command cancels the double width characters set with SO. The data following this
command are printed in the ordinary character width.
SI (CBM2 Mode)
[Function] Canceling the double width character/Specifying the shift-in side characters
[Code] <0F>H
[Outline] This command cancels the double width characters set with SO. The data following this
command are printed in the ordinary character width.
In the case of a serial interface, if 7-bit data is selected, the shift-in side character is printed.