Filter
Top Products
iDP3550/3551 User’s Manual
15
CITIZEN
Handling of the fan-fold paper
1. iDP3550P can use the fan-fold paper of the 3 to 3.5 inches.
2. Change the position of the sprocket (pin tractor) as necessary when feeding the paper.
3. After feeding the paper, align it with the mark on the platen.
CAUTION : • Be sure to use the specified fan-fold paper.
• Use of unspecified paper may adversely affect print quality, printer service life, and so on.
4. The sprocket holes on 3-inch fan-fold paper may be positioned 6.35 mm or 5 mm from the edge of the
paper. Note the following when feeding 3-inch fan-fold paper.
CAUTION : • 6.35mm
When feeding paper with sprocket holes positioned 6.35 mm from the edge, align the
edges with the paper guides on the printer. Because the edges of the printing area are
close to the sprocket holes, it is important to make sure the paper is positioned correctly.
•5mm
When feeding paper with sprocket holes positioned 5 mm from the edge, align the pins in
the sprockets with the positions of the paper holes and then turn the knob. Note that in this
case there is a gap between the edges of the paper and the paper guides on the printer.
5. Use fan-fold paper with round sprocket holes.
6. When using multiple page fan-fold paper, the perforated line on the margin should be within 5mm of the
side of the paper.