Filter
Top Products
uses.
Encryption: Shows the encryption method that access point or wireless device
uses. If the wireless access point does not enable encryption, you’ll
see ‘None’ displayed here.
Authentication: Shows the authentication mode that access point or wireless
device uses. If the wireless access point does not require
authentication, you’ll see ‘Unknown’ displayed here.
Network Type: Shows the type of wireless connection. If it’s a wireless access
point, ‘Infrastructure’ will be displayed here; if it’s a computer or
network device, ‘AdHoc’ will be displayed here.
Tips:
Wireless access point (Infrastructure) is a network device which acts as
a bridge, to let wired and wireless network devices communicate with
each other.
A
dHoc is another connection type. A computer or network device can
establish a direct wireless link with other computer or network device
directly, without the help of wireless access point.
3. Click the wireless access point or network device you wish to connect, it will be highlighted,
then click ‘Connect’.
Note: There is no Connect button in Window Vista. You have to use the Add Profile
feature to build the wireless connection with the selected network. Please refer to the
Profile information.
13