Filter
Top Products
3. You have to input correct passphrase / security key to
connect an access point with encryption. Please
contact the owner of access point to ask for correct
passphrase / security key.
4. The access point you wish to connect only allows
network cards with specific MAC address to
establish connection. Please go to ‘About’ tab and
write the value of ‘Phy_Addess’ down, then present
this value to the owner of access point so he / she
can add the MAC address of your network card to
his / her access point’s list.
The network is slow / having
problem when transferring large
files
1. Move closer to the place where access point is
located.
2. Enable ‘Wireless Protection’ in ‘Advanced’ tab.
3. Try a lower TX Rate in ‘Advanced’ tab.
4. Disable ‘Tx Burst’ in ‘Advanced’ tab.
5. Enable ‘WMM’ in ‘QoS’ tab if you need to use
multimedia / telephony related applications.
6. Disable ‘WMM – Power Save Enable’ in ‘QoS’ tab.
7. There could be too much people using the same
radio channel. Ask the owner of the access point to
change the channel number.
Please try one or more solutions listed above.
66