Filter
Top Products
Direct Link Enable or disable direct link setup (DLS) function.
Setup Enable This function will greatly improve the data transfer rate between
WMM-enabled wireless devices. Please click ‘Apply’ button on the
right of this check box after you check or uncheck this box, so
corresponding settings in this window will be activated or
deactivated respectively.
MAC Address Input the MAC address of another WMM-enabled
wireless device you wish to establish a direct link here, then click
‘Apply’ to add this MAC address to DLS address table.
Timeout Value Input the timeout value of this WMM-enabled direct link wireless
device. If the wireless device is not responding after this time, it will
be removed from DLS table.
Tear Down If you want to remove a specific wireless device from DLS table,
select the device and click this button to remove it.
After you finish the settings, click ‘OK’ to close configuration utility.
42