Filter
Top Products
channels available here will vary depends on the setting of
‘Country Region Code’.
Wireless Mode Please select the wireless operating mode. You can limit the type
of wireless client to 802.11b or 802.11g only, or allow 802.11b/g,
and 802.11b/g/n clients. It’s safe to select ‘802.11 B/G/N mix’ to
allow all kinds of wireless client to connect to your computer, unless
you want to limit the type of wireless client allowed to connect to
your computer.
Use Mac Click this button to use the MAC address of the
Address wireless card as SSID. A prefix of ‘AP’ will be added.
Security Set the security options (wireless data encryption)
Setting Please refer to chapter 3-2 ‘Security Settings’ for details.
Country Please select the country code of the country or
Region Code region you live. Available options are 0-7, which will affect the
available wireless channels you can use:
0: FCC (US, Canada, and other countries uses FCC radio
communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
Wireless Wireless protection will prevent data collision when
Protection there are both 802.11b and 802.11g clients. You can select ‘Auto’ to
let configuration utility to decide to use wireless protection or not.
You can also select ‘ON’ or ‘OFF’ to force the use of wireless
protection or not.
Beacon(ms) You can define the time interval that a beacon signal should be
send. Default value is 100. Do not modify this value unless you
54