Filter
Top Products
Here are descriptions of every setup items:
Wireless mode Select wireless operation mode, available options are 802.11 B/G
mix, 802.11 B only, and 802.11 B/G/N mix. You can select 802.11
B/G/N mix to maximize wireless compatibility with wireless access
points and other wireless devices. Anyway, you can set this setting
to ‘802.11 B only’ when you’re going to communicate with old
802.11b wireless devices and you got problem using other two
modes.
Wireless This setting helps your network card to avoid
Protection interference with other wireless devices when there are both
802.11b and 802.11g wireless devices in the same place. It’s
recommended to set this setting to ‘Auto’ , since enabling this
setting will slightly reduce the data transfer performance.
TX Rate Normally, the wireless network card will adjust transfer rate
automatically according to wireless signal quality. However, you
can fix the data transfer rate to a lower fixed rate if you think there’s
some problem about data transfer, or you’re too far from wireless
access point. It’s recommended to set this setting to ‘Auto’, unless
you really know the meaning of this setting.
Tx BURST Check this box to accelerate the data transmit rate. It may not work
with all wireless access point and wireless devices.
Enable TCP Check this box and the configuration utility will
Window Size adjust TCP window size automatically, to get better performance. It
should be safe for most of wireless environments, but if you found
some problem on data transfer, uncheck this box.
Fast Roaming at Check this box and you can adjust the threshold of
when this wireless network card should switch to another wireless
access point with better signal quality. Only adjust value when you
understand what it means.
Turn off RF Click this button to switch wireless radio off, click it
again switch wireless radio on.
38