Filter
Top Products
MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index Page Preface -or- Notice Specifications Battery Pack
Product Description Illustrated Parts Catalog Troubleshooting Removal & Replacement
Removal & Replacement
Service Considerations
Listed below are some of the considerations that you should keep in mind
during the disassembly and assembly of the computer:
Tool and Software Requirements
To service the computer, you need the following:
Compaq screwdriver kit (Spare Part No. 161946-001)●
Torx T-9 screwdriverS●
3/16-inch and 5mm nut drivers (for screwlocks and standoffs)●
Small, standard screwdriver●
Small, Phillips screwdriver●
Diagnostics software●
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used
during the reassembly process, it can damage the unit. Compaq strongly recommends
that all screws removed during disassembly be kept with the part that was removed,
then returned to their proper locations.
IMPORTANT:
As each subassembly is removed from the computer, it should be
placed away from the work area to prevent damage.
Continue Preliminary pages:
Cables & Connectors
Preparing Computer for Disassembly
Revised: September 16, 1999