Filter
Top Products
Command Line Interface
C-46 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
Enabling the pending table zone set
Enable the zone set in the pending table, so that when it is written to the active table
it will be activated:
cmd> zone enable MIS_NT_CLSTR1_SAN1
Zoneset [MIS_NT_CLSTR1_SAN1] enabled.
Stage Two: Verifying the Zoning Configuration in the Pending Table
Make sure that you have the correct configuration by viewing your newly created
pending tables. There are four different ways you can confirm that your pending
tables are correct.
• Viewing all zone sets, their zones, and zone members in the pending table
• Viewing the zone set in the pending table
• Viewing the zones in the pending table
• Viewing the zone members in the pending table
Viewing the Zone Set, its Zones, and its Zone Members in the pending table
To display all zone sets, zones, and zone members in the pending table:
cmd> zone pending
Active zoneset [MIS_NT_CLSTR1_SAN1] contains 2 zone(s)
zone [Web_Zone] contains 4 member(s)
zone member = [1000000102421303]
zone member = [2100005004d02f78]
zone member = [210000010241ff73]
zone member = [210000010249a7ab]
zone [Mail_Zone] contains 4 member(s)
zone member = [210000010241ff73]
zone member = [210000010249a7ab]
zone member = [100000a0c991a47a]
zone member = [200000600819ae48]