Compaq 230934-002 Switch User Manual


 
Initial Configuration of the Switch
Modular SAN Array Fabric Switch 6 User Guide 2-7
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: c-ch2 Initial Configuration of the Switch.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:46 AM
Setting the IP Address
Select option 2. Set IP address in the Network Parameters menu to call up the IP
Address menu shown in the figure below. It displays the current IP address. The
default (127.0.0.1) is set at the factory. This address should be changed to an IP
address appropriate to your site. Check with the network administrator if uncertain of
what this should be. Check with your network administrator before using the default
address, as it is a special IP address used for testing purposes only.
Figure 2-3: Network Parameters – Set IP address