Compaq 230934-002 Switch User Manual


 
MSA Fabric Switch 6 Management Utility
Modular SAN Array Fabric Switch 6 User Guide 3-43
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: d-ch3 MSA Fabric Switch 6 Management Utility.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:52 AM
The following table lists the parameters in the Download Control panel.
Table 3-13: Firmware Window
Parameter Description
Current Version Displays the version of the firmware currently on the Fabric switch 6.
File Name Enter the file name of the file that you want to download.
TFTP Server IP
Address
Enter the IP address of the TFTP Server from which you want to
download the new firmware.
TFTP Time-out (msec) Enter the time in milliseconds that you want the switch to wait after
requesting a download before requesting again.
TFTP Retries Enter the number of times you want the switch to try downloading the
new firmware before quitting.
Last Download Status This parameter reports either success or failure for the last download
operation.
Download Only Click this radio button if you want the switch to download the new
firmware without rebooting. You must reboot the switch for the new
firmware to become operable.
Download & Reboot Click this radio button if you want the switch to download the new
firmware and then reboot the switch. The new firmware becomes
operable when the switch is rebooted. You will need to reload the Applet
after the switch is rebooted.
Note: Resetting the switch disrupts the network. This may affect
performance, but does not corrupt the data on the disk drives attached to
the switch. It does, however, erase any statistics and other management
data that has been collected.