Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal and Replacement Procedures 5-41
7. Turn the computer top side up and open the display to a vertical position,
8. Remove the four clutch screws at the back of the display assembly.
9. Lift the display assembly from the CPU base. As you lift the display , guide the flat
ribbon display cable and the ground cable through the slot to prevent damage.
Figure 5-41.
Removing the Screws and Lifting the Display Assembly from the Clutches
CAUTION:
Do not pull out the clutch cover when removing the display assembly. Doing
so may damage the microphone cable harness.