Filter
Top Products
Working with the MultiBay
Quick Setup & User’s Guide 2-5
3. With the top of the drive facing left and the drive connector facing the
Personal Computer, slide the drive into the MultiBay and push firmly to
ensure that the electrical connector is properly seated.
Inserting a Drive into the MultiBay
If the device does not start, ensure that the necessary device drivers are
installed on the system. If they are not available, they may be downloaded, at
no cost, from the Compaq Web site at www.compaq.com.
Removing a Drive from the MultiBay
1. Exit all software applications, shut down the operating system software,
and turn off the Personal Computer if
❏ You are inserting or removing a hard drive.
❏ The Personal Computer is running a retail version of Windows 98 or
Windows NT 4.0 without software enhancements from Compaq.
2. Remove the iPAQ Desktop Security Bar, if it has been installed so as to
disable the MultiBay eject button 1.Referto“Uninstalling the iPAQ
Desktop Security Bar” on page 3-1.
QuickSetup_UsersGuide.book Page 5 Wednesday, May 30, 2001 9:36 AM