Desktop Management
Quick Setup & User’s Guide 6-21
4. Select Remote Wakeup.
5. Change the value to ON.
6. Click OK to save and apply changes, then click OK to exit the Network
dialog.
For more information on using Remote Wakeup and Remote Shutdown, refer
to the online Remote Management Administrators Guide.TheRemote
Management Administrators Guide is included with the Remote Management
Setup Utilities, and is available on the Compaq Web site at
www.compaq.com.
NIC-Based Alerts
NIC-based alert support allows a system administrator to remotely monitor
personal computers and Personal Computers over the network. The Personal
Computer can send hardware and operating system failure alerts over the
network before the operating system is loaded or when the Personal Computer
is powered off. Alerts may include:
■ system BIOS hang
■ operating system hang
■ processor missing
■ operating temperature exceeded
Replicating Your Setup
This procedure gives an administrator the ability to easily copy one setup
configuration to other Personal Computers of the same model. This allows for
faster, more consistent configuration of multiple Personal Computers. To
replicate your setup:
1. Access the Computer Setup Utilities menu.
2. Click File > Save to Diskette. Follow the instructions on the screen.
✎
This requires a MultiBay LS-120 drive or a portable, external diskette drive.
3. To replicate the configuration, click File > Restore from Diskette, and
follow the instructions on the screen.
QuickSetup_UsersGuide.book Page 21 Wednesday, May 30, 2001 9:36 AM