Filter
Top Products
Setup Utility (Intel Pentium 4 Models)
Advanced CMOS Setup Screen
The Advanced CMOS Setup Screen is used to change the device
order your system boots from, the password mode, and the amount of
time before your system enters POST.
Advanced CMOS Setup Screen
Heading Description
1st Boot Device Specifies the boot order for all devices.
2nd Boot Device Specifies the boot order for all devices.
3rd Boot Device Specifies the boot order for all devices.
S.M.A.R.T. for Hard Disks Allows Self-Monitoring, Analysis and Reporting Technology
(S.M.A.R.T.) to work on your hard drive.
System Keyboard Indicates the keyboard is present.
Password Check Indicates the system will check for a password before the user
can access the Setup Utility.
Post Mode Allows you to choose Quick Boot, which is faster than Full Boot
but does not run all of the diagnostic tests run during a FullBoot.
Post Delay Time (in
seconds)
Allows you to set the amount of time the Setup Utility prompt
(Del = Setup) appears when the computer boots. Full Boot mode
must be enabled.
Quiet Mode Determines if the CD-ROM drive will run in Quiet Mode.
System BIOS Cacheable Enabled/Disabled
Support for Setup Utility options may vary depending on your specific hardware configuration.
3-4 Compaq Evo D300v User’s Guide