Filter
Top Products
Setup Utility (Intel Celeron Models)
Computer Setup (Continued)
Heading Option Description
Storage
(continued)
Options
(continued)
Primary IDE Controller
Allows you to enable or disable the primary IDE
controller.
Secondary IDE Controller
Allows you to enable or disable the secondary
IDE controller.
Diskette MBR Validation
Allows you to enable or disable strict validation
of the diskette Master Boot Record(MBR).
If you use a bootable diskette image that
you know to be valid, and it does not
boot with Diskette MBR Validation
enabled, you may need to disable this
option in order to use the diskette.
IDE DPS Self-Test Allows you to execute self-tests on IDE hard
drives capable of performing the Drive
Protection System (DPS) self-tests.
This selection will only appear when at
least one drive capable of performing
the IDE DPS self-tests is attached to the
system.
Hard Drive Order
(supported on select
models only)
Allows you to specify the order of attached
hard drive controllers. The first hard drive
controller in the order will have priority in the
boot sequence and will be recognized as drive
C (if any devices are attached).
Support for Computer Setup options may vary depending on your specific hardware
configuration.
4-8 Compaq Evo D300v User’s Guide