Filter
Top Products
Setup Utility (Intel Pentium 4 Models)
Peripheral Setup Screen
The Peripheral Setup Screen is used to configure the settings for
peripheral devices.
Peripheral Setup Screen
Heading Description
OnBoard IDE Specifies the settings for the IDE controller.
OnBoard LAN Specifies the settings for the NIC controller.
LAN Chip Boot ROM Allows the computer to boot from the NIC.
OnBoard AC’ 97 Audio Specifies the settings for the OnBoard sound.
OnBoard FDC Specifies the settings for the diskette drive controller.
OnBoard Serial Port A Specifies the settings for the COM 1 port controller.
OnBoard Serial Port B Specifies the settings for the COM 2 port controller.
Specifies the settings for the parallel port controller.
Specifies the parallel port mode.
Specifies the parallel port IRQ.
OnBoard Parallel Port
• Parallel Port Mode
• Parallel Port IRQ
• Parallel Port DMA
Channel
Specifies the parallel port DMA Channel.
OnBoard Game Port Specifies the settings for the OnBoard game port.
Specifies the settings for the OnBoard Midi port.
OnBoard Midi Port
• Midi IRQ Select
Specifies the settings for the Midi IRQ.
Support for Setup Utility options may vary depending on your specific hardware configuration.
Hardware Monitor Setup Screen
The Hardware Monitor Setup screen reports the temperature of the
hardware and components, including the following:
■
CPU Ration selection
■
CPU Temperature
3-8 Compaq Evo D300v User’s Guide