Filter
Top Products
Setup Utility (Intel Celeron Models)
Computer Setup (Continued)
Heading Option Description
Advanced* Power-On Options Allows you to set:
• POST mode (QuickBoot, FullBoot, or
FullBoot every 1-30 days)
• POST messages (enable/disable)
• Safe POST (enable/disable)
• F9 prompt (enable/disable)
• F10 prompt (enable/disable)
• F12 prompt (enable/disable)
• Option ROM prompt (enable/disable)
• Remote wakeup boot sequence (remote
server/local hard drive)
• Power Strip Control feature (off/on): After
power loss, if you connect your computer to
an electric power strip, and would like to
turn on power to the computer using the
switch on the power strip, set this option to
on.
If you turn off power to your computer
using the switch on a power strip, you
will not be able to use the
suspend/sleep feature or the Remote
Management features.
• UUID (Universal Unique Identifier)
(enable/disable)
• POST delay (in seconds)
• I/O APIC Mode
Onboard Devices Allows you to set resources for or disable
onboard system devices (diskette controller,
serial port, parallel port).
Support for Computer Setup options may vary depending on your specific hardware
configuration.
* These options should be used by advanced users only.
4-14 Compaq Evo D300v User’s Guide