Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–21
3. Disconnect the modem/NIC cable from the modem/NIC
board
1
(Figure 5-16).
4. Pull away the retention clips on each side of the modem/NIC
board
2
. The modem/NIC board tilts upward.
5. Lift the edge of the modem/NIC board and slide it out of the
connector at a 45-degree angle
3
.
6. Place the modem/NIC board in an electrostatic-safe
container.
Figure 5-16. Removing the Modem/NIC Board
Reverse the above procedure to install the modem/NIC board.