Filter
Top Products
5–34 Maintenance and Service Guide
Removal and Replacement Procedures
5. Position the notebook so the front faces you.
✎
Steps 6 through 11 apply only to Evo Notebook N410c models.
6. Lift the RJ45/RJ11 connector module
1
out of the base
enclosure (Figure 5-26).
7. Disconnect the microphone cable
2
from the connector on
the display lid switch board.
8. Disconnect the microphone cable
3
from the system board.
9. Remove the PM 2.0 × 5.0 screw
4
that secures the display lid
switch board to the base enclosure.
Figure 5-26. Removing the Modem Cable on Evo Notebook
N410c Models