Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–13
✎
Evo Notebook N400c models only—Models with pointing stick
keyboards have a pointing stick button cable that needs to be
disconnected prior to removing the palm rest. Perform Steps 12
and 13 before removing the palm rest on a pointing stick model.
12. Release the zero insertion force (ZIF) connector to which the
pointing stick button cable is attached
1
and disconnect the
pointing stick button cable
2
(Figure 5-10).
Figure 5-10. Disconnecting the Pointing Stick Button Cable
13. Remove the palm rest and set it aside.
Reverse the above procedure to install the palm rest.