Filter
Top Products
United States January 2, 2003
Presario 1600 Series
Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin Product Description Parts Catalog
Specifications Battery Operations Pin Assignments
Removal Sequence Troubleshooting MSG Index
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
QuikDock
Battery Pack
Palmrest Cover
with TouchPad
Keyboard
Status/Internet
Zone Cover
Internet
Button Board
Heatspreader
Modem
Hard Drive
DisqPlay
Module
Processor
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
RTC Battery
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Removal Sequence
Service Considerations
Listed below are some of the considerations that
you should keep in mind during the disassembly
and assembly of the computer.
Tool and Software Requirements
You will need the following items to service the
computer:
● Torx T-8 or T-9 screwdriver
● 5mm nut drivers (for screwlocks and
standoffs)
● Small standard screwdriver
● Small Phillips screwdriver
● Diagnostics software
Screws
The screws used in the computer are not
interchangeable. If an incorrect screw is used
during the reassembly process, it can damage
the unit. Compaq strongly recommends that all
screws removed during disassembly be kept with
the part that was removed, then returned to their
proper locations.
IMPORTANT:
As each subassembly
is removed from the
computer, it should be
placed away from the
work area to prevent
damage.
privacy statement
legal notices