Filter
Top Products
United States January 2, 2003
Presario 1600 Series
Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin Product Description Parts Catalog
Specifications Battery Operations Pin Assignments
Removal Sequence Troubleshooting MSG Index
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
QuikDock
Battery Pack
Palmrest Cover
with TouchPad
Keyboard
Status/Internet
Zone Cover
Internet
Button Board
Heatspreader
Modem
Hard Drive
DisqPlay
Module
Processor
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
RTC Battery
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Removal Sequence
Removing the Keyboard
To remove the keyboard, complete the following
steps:
1.
Prepare the computer for disassembly.
2. Remove the Palmrest Cover with TouchPad.
3. Gently lift up the front of the keyboard and
disconnect the flex cable from the ZIF
connector on the system board and remove the
keyboard.
To replace the keyboard, reverse the previous
procedures.
NOTE:
When replacing the keyboard,
the keyboard cable should fold
behind the
ZIF connector rather
than underneath the keyboard.
privacy statement
legal notices