Filter
Top Products
United States January 2, 2003
Presario 1600 Series
Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin Product Description Parts Catalog
Specifications Battery Operations Pin Assignments
Removal Sequence Troubleshooting MSG Index
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
QuikDock
Battery Pack
Palmrest Cover
with TouchPad
Keyboard
Status/Internet
Zone Cover
Internet
Button Board
Heatspreader
Modem
Hard Drive
DisqPlay
Module
Processor
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
RTC Battery
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Removal Sequence
Removing the Heatspreader
To remove the Heatspreader, complete the following steps:
1.
Prepare the computer for disassembly.
2. Remove the Palmrest Cover with TouchPad.
3. Remove the keyboard.
4. Remove three screws from the Heatspreader and lift
out of the chassis.
NOTE:
If the thermal pads on the
Heatspreader are missing or damaged,
a new Heatspreader should be
installed.
To replace the Heatspreader, reverse the previous
procedures.
IMPORTANT:
Before installing the new
Heatspreader, remove the
plastic covering from the
thermal pads.
WARNING: To prevent damage, do
not use excessive force when replacing
the screws.
privacy statement
legal notices