Filter
Top Products
United States January 2, 2003
Presario 1600 Series
Models: 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143,
1600-XL144, 1600-XL145, 1600-XL146, 1600-XL147, and 1600-XL150
Before You Begin Product Description Parts Catalog
Specifications Battery Operations Pin Assignments
Removal Sequence Troubleshooting MSG Index
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
QuikDock
Battery Pack
Palmrest Cover
with TouchPad
Keyboard
Status/Internet
Zone Cover
Internet
Button Board
Heatspreader
Modem
Hard Drive
DisqPlay
Module
Processor
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
RTC Battery
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Removal Sequence
Removing the Battery Charger Board
(Voltage Converter Board)
To remove the battery charger board, complete the
following:
1.
Prepare the computer for disassembly.
2. Remove the Palmrest Cover with TouchPad.
3. Remove the keyboard.
4. Remove the Heatspreader.
5. Remove the Status/Internet Zone Cover.
6. Remove the Internet Button board.
7. Remove the display panel Assembly.
8. Remove the hard drive.
9. Remove the upper CPU cover.
10. Remove two screws from the battery charger
board, unplug the board from the connector on
the system board, and lift battery charger
board out of the chassis.
To replace the battery charger board, reverse the
previous procedures.
NOTE:
When replacing the battery
charger board, ensure that the
pins are aligned with the
connector on the system board.
privacy statement
legal notices