Filter
Top Products
rmsctl(1)
RMS service stopped on atlas0
RMS service stopped on atlas3
RMS service stopped on atlas2
RMS service stopped on atlasms
To start the RMS system, use rmsctl as follows:
# rmsctl stop
RMS service started on atlas0
RMS service started on atlas1
RMS service started on atlasms
RMS service started on atlas2
RMS service started on atlas3
pmanager-parallel: cpus=16 (4 per node) maxfree=4096MB swap=5171MB no memory limits
pstartup.OSF1: general partition parallel starting
pstartup.OSF1: enabling login on partition parallel
Enabling login on node atlas1.quadrics.com
Enabling login on node atlas3.quadrics.com
Enabling login on node atlas0.quadrics.com
Enabling login on node atlas2.quadrics.com
To show the status of the RMS system, use rmsctl as follows:
# rmsctl show
SERVER HOSTNAME STATUS PID
tlogmgr rmshost running 778
eventmgr rmshost running 780
mmanager rmshost running 789
swmgr rmshost running 799
pmanager-parallel rmshost running 33357
STATUS NODES
running atlas[0-3] atlasms
CPUS NODES
4 atlas[0-3] atlasms
MEMORY NODES
4096 atlas[0-3]
1024 atlasms
SWAP SPACE NODES
5171 atlas0[0-3] atlasms
TMP SPACE NODES
6032 atlas[0-3]
5703 atlasms
SEE ALSO
rcontrol
5-38 RMS Commands