Filter
Top Products
Chapter 10 - WAN Link Protocols 173
The number of echo packets sent, and the number of responses, are counted.
If the conditions set in the Drop Link When... (discussed below) fields are
met, the link is dropped.
• If checked, echo packets will be regularly sent, and line quality moni-
tored.
Frequency in Seconds (Echo Packets)
This parameter determines how often an echo packet will be sent to the other
end. The value must be in the range of 1 to 32.
Drop Link When
These parameters set the size of the echo sequence that will be tracked, and
the number of packets that must be lost out of a sequence before the link will
be dropped. The values must be in the range of 1 to 32.
LCP Options Configuration Dialog Box
LCP Options Configuration Dialog Box
You can access the LCP Options Configuration Dialog Box by selecting On
Demand PPP Link or Dedicated PPP Link from the Link Type pulldown
in the Link Configuration: WAN Dialog Box (under WAN/Link Configura-
tion), and then clicking on the PPP Options button at the bottom of the dialog
box, and then clicking on the LCP Options button at the bottom of the PPP
Options Dialog Box.
This dialog box is used to set parameters relating to PPP’s internal operation.
You will probably never need to change the settings in this dialog box.