Filter
Top Products
Connect Tech Blue Heat/Net Sync User Manual
44 Revision 0.03
Running the Configuration Manager
If you chose the option to launch the Blue Heat/Net Sync Configuration Manager after
installation, the main Configuration Manager window should now be open on your screen. If
you did not, you can launch it from the CTI default folder or whichever folder you chose during
the installation.
Figure 26: My Blue Heat/Net Sync Places Screen
Device Installation
Select My Blue Heat/Net Sync Places from the main Configuration window. (NOTE: If there is no
Blue Heat/Net Sync installed, you will be prompted to auto discover a Blue Heat/Net Sync on
your network. If you choose to do so, click Yes and then jump ahead to the Auto Discover Blue
Heat/Net Sync section)
Right-click on My Blue Heat/Net Sync Places or click on the Action menu to pull up the sub menu
options.
There are three ways to install a Blue Heat/Net Sync device: Configure Default Blue Heat/Net
Sync, Add New Blue Heat/Net Sync or Auto Discover Blue Heat/Net Sync.