Filter
Top Products
CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode
26
CONFIGURING & ADJUSTING the Display: PC (ANALOG)
Mode
Using the system’s On Screen Displays (OSD), you can adjust and refine
your Monitor’s image.
The following table describes the initial set-up steps and the other menus
available.
Remember,
when using the buttons on the front of your Monitor
:
• Press the MENU button to display the Main Menu.
• Use the CHANNEL
▲ ▼
buttons to scroll through the menu
items.
• Press the SELECT button to choose the desired menu item
and
to store the new value/parameter.
• Use the VOLUME
buttons to increase/decrease the
value/parameter.
Initial Set-Up & Adjustment of the Monitor
Select the Input Source Mode
1. After all the connections are
made, turn ON both the Computer
and the Monitor.
2. Select the Input Source mode by
using
either
the Remote Control:
•Pressing (repeatedly) the
SOURCE button
OR
The buttons on the front of the
Monitor by:
•Pressing the SELECT button
(repeatedly) to scroll through
the various Input Source
modes
OR
•From the Main Menu, choose
the SELECT INPUT (CT1503)/
SETUP option (CT1702).
3. Select the ANALOG mode.
CT1503 Input Source Scroll Sequence:
CT1702 Input Source Scroll Sequence:
Digital S-Video Tuner Analog
Digital Composite S-Video Tuner Analog